Pakistan Research Repository

Browse by Subject

Up a level
Number of items at this level: 50.

Syed , Sajjad Hussain Rizvi (2014) A New Framework To Bridge Semantic Gap For Semantics Based Image Retrieval. PhD thesis, IQRA University, Karachi.

Ahmad, Jawwad (2014) Design of Efficient Adaptive Beamforming Algorithms for Novel MIMO Architectures. PhD thesis, IQRA University, Karachi.

Tahir, Mahmood (2014) Impedance Spectroscopy Of Nano-porous Anodic Alumina Structures. PhD thesis, Pakistan Institute of Engineering & Applied Sciences, Islamabad.

Rasool, Kamran (2014) Investigation Of Carrier Transport In Semiconductor Nanostructures. PhD thesis, Pakistan Institute of Engineering & Applied Sciences, Islamabad.

Mustafa Amin, Khawaja (2014) Optimizing Effects Of Superheat And Cooling Rate On Properties Of Squeeze Cast Aluminum Alloys For High-performance Structural Applications. PhD thesis, University of Engineering & Technology, Lahore.

Bahadar, Ali (2014) Production Of Biodiesel Using Heterogeneous Catalyst And Super Critical Fluid Extraction. PhD thesis, National University Of Sciences And Technology, Islamabad.

Bakhsh, Nabi (2014) Role Of Carbon Nanotubes Reinforcement And Processing Parameters On Mechanical Properties Of Alumina Based Nanocomposites. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

Rehman, Ata-ur- (2014) Synthesis And Characterization Of Aliovalent Doped Bismuth Ferrite Multiferroics. PhD thesis, Pakistan Institute of Engineering & Applied Sciences, Islamabad.

Rahman, Atta Ur (2014) Synthesis And Characterization Of Cobalt Ferrite Nanostructures. PhD thesis, Pakistan Institute of Engineering & Applied Sciences, Islamabad.

Zaman, Tariq (2014) Synthesis Of Chiral Ligands And Their Applications In Combinatorial Asymmetric Catalysis. PhD thesis, National University Of Sciences And Technology, Islamabad.

Shah, Attaullah (2014) Transition Metal (TM) Implanted III Nitrides Semiconductor Films Prepared by Molecular Beam Epitaxy (MBE) Synthesis and Characterization. PhD thesis, Pakistan Institute of Engineering & Applied Sciences, Islamabad.

Imran, Zahid (2014) Transport And Gas Sensing Properties Of Cadmium Titanate Nanofibers. PhD thesis, Pakistan Institute of Engineering & Applied Sciences, Islamabad.

Iqbal, Nadeem (2013) Ablatives Based On Multiple Reinforced Elastomeric Composites For Aerospace Applications. PhD thesis, National University Of Sciences And Technology, Islamabad.

Jamal, Faheem Qaisar (2013) Impact Of Downsizing On Organizational Commitment, Motivation And Psychological Well-being Among Workers Of Secondary And Tertiary Organizations Of Pakistan. PhD thesis, University of Engineering & Technology, Taxila.

Muhammad , Basharat (2012) Integration Of Canal And Groundwater To Improve Cost And Quality Equity Of Irrigation Water In A Canal Command. PhD thesis, University of Engineering & Technology, Lahore.

Shah, Aqueel (2012) Investigation Of Variables Affecting Kerf Width Surface Roughness And Material Removal Rate In Wire Electrical Discharge Machining. PhD thesis, University of Engineering & Technology, Lahore.

Malik, Zaheer Muhammad (2012) Performance Evaluation Of Selective Control Measures Of Foundation Seepage For Embankment Dams Over Permeable Strata. PhD thesis, University of Engineering & Technology, Lahore.

Abdul , Abdul (2012) Tribological Analysis And Characterization Of HVOF Sprayed Tungsten Carbide Cobalt Coatings. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

Sajjad, Muhammad (2011) Calculation of First Forbidden Stellar Decay Rates for Neutron rich Nuclei and Analysis of Allowed Weak Rates in pn-QRPA Model. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

Sabahat , Arif (2011) Energy Efficient House Design: Effect of Orientation on Indoor Temperature Profile. PhD thesis, University of Engineering & Technology, Lahore.

Bibi, Nagina (2011) Meshless Method of Lines for Numerical solutions od Nonlinear Time Dependent Partial Differential Equations. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

Bibi, Nagina (2011) Meshless Method Of Lines For Numerical Solutions Of Nonlinear Time Dependent Partial Differential Equations. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

Uddin, Marjan (2011) RBF Approximation Method for Initial Boundary Value Problems. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

Din , Marjan ud (2011) RBFs approximation methods for initial-boundary values problems. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

Malik, Zulfiqar Ali (2011) Relationship Between Tensile Strength Of Yarn And Woven Fabric. PhD thesis, Mehran University of Engineering & Technology, Jamshoro.

Zaigham, Hamid (2011) Role of Tin Addiction on Prorerties and Phases of SmCo5 Alloys. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

Zaigham, Hamid (2011) Role Of Tin Additions On Properties And Phases Of Smco5 Alloys. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

Rafiq, Muhammad Asif (2011) Synergistic Effect of Zirconia and Impurities on the Properties of Mn-Zn Ferrites Synthesized by Mixed Oxide and Auto Combustion Routes. PhD thesis, Pakistan Institute of Engineering & Applied Sciences, Islamabad.

Muhammad, Farhan (2010) Analysis for Enhanvement of Inherent Safety of an MTR. PhD thesis, Pakistan Institute of Engineering & Applied Sciences, Islamabad.

Jilani, Abdul Basit (2010) Atmospheric Dispersion and Consequence Modeling of Radiological Emergencies. PhD thesis, Pakistan Institute of Engineering & Applied Sciences, Islamabad .

Husain, Khawaja Altaf (2010) Establishment Of Machine & Crop Parameters For Cold Pulping Of Tomato. PhD thesis, University of Agriculture, Faisalabad .

Ramay, M. Ismail (2010) Influence of Leadership Behavior and Participatory Decision Making on the Employees organizational Commitment. PhD thesis, University of Engineering & Technology, Taxila.

Saleem , Muhammad (2010) Investigation of Organic Materials for the Fabrication of Electric, Electronic and Photonic Devices. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi .

Hayat, Jokhio Muhammad (2010) Modeling Of High Strength And Wear Resistance Aluminum Alloy Based Casting Composite Material. PhD thesis, Mehran University of Engineering & Technology, Jamshoro.

Aslam, Shazia (2010) Study of Effective Virtual Project Management Through Emotional Intelligenve. Empowerment and Leadership Style in Partly and Truly Global Projects. PhD thesis, University of Engineering & Technology, Taxila.

Salman, Maj Muhammad (2009) Adaptive Estimation Using State Space Methods. PhD thesis, National University Of Sciences And Technology, Islamabad.

Kureshi, Nadeem Ishaq (2009) Determinants Of Quality Diffusion In Smes In Upstream Supply Chains For Future Competitiveness. PhD thesis, University of Engineering & Technology, Taxila .

Pasha, Riffat Asim (2009) Fatigue Behavior Of Piezoelectric Ceramics Material. PhD thesis, University of Engineering & Technology, Taxila.

Ahsan, Ali (2009) Organization Development for Revitalization of Information Technology Sector of Pakistan. PhD thesis, University of Engineering & Technology, Taxila.

Muhammad, Ramazan (2009) Projective and Curvature Symmetries in non-static Space Times Intelligent View Extrapolation for Dynamic Scenes. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

IQBAL , SALMAN (2007) OPTICAL METROLOGY WITH LASERS AND POSITIONS- SENSITIVE DETECTORS. PhD thesis, International Islamic University, Islamabad.

Khan, Tauseef Ahmed (2007) ORGANIC SEMICONDUCTOR COPPER PHTHALOCYANINE PHOTOELECTRIC, PHOTOCAPACITIVE AND HUMIDITY SENSORS. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

Abdul, Shakoor (2007) The Effect of Samarium Additions on the Shape Memory and Thermomechanical Behavior of Iron Based Shape Memory Alloys. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi .

Junejo, Hasan Fawad (2006) FINITE ELEMENT MODELING OF WELD BASED RAPID PROTOTYPING. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

Khan, Asifullah (2006) Intelligent Perceptual Shaping of A Digital Watermark Using Genetic Programming. PhD thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

Khan, Gul Daraz (2004) DEVELOPMENT OF OPERATIONAL AND MANAGEMENT STRATEGIES FOR GRAVITY FLOW SUBSURFACE CONTROLLED DRAINAGE SYSTEMS. PhD thesis, University of Engineering & Technology, Lahore.

Iqbal, Masood (1999) CALCULATION AND EXPERIMENTAL INVESTIGATION OF VOID EFFECT IN RESEARCH REACTORS. PhD thesis, Quaid-i-Azam University, Islamabad.

Durrani, Ayatullah (1994) Solar insolation models at Quetta and proposal for installation of heating and cooling systems in Science Faculty. PhD thesis, University of Balochistan, Quetta.

Bhutto, Hussain Bakhsh G. (1987) HYDRAULIC JUMP CONTROL AND ENERGY DISSIPATION. PhD thesis, Mehran University of Engineering & Technology, Jamshoro.

Uppal, Indar Sain WETTING AGENTS IN TEXTILE PROCESSING. PhD thesis, University of the Punjab, Lahore.

This list was generated on Thu May 28 20:43:47 2015 PKT.