Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | E | F | I | K | M | N | Q | R | S | T
Number of items at this level: 28.

A

Adnan, tariq (2010) Operational Design of a Cellular Manufacturing System. Doctoral thesis, National University of Sciences and Technology, Rawalpindi.

Anjum Khalid, . (2008) Experimental Investigation and Mathematical Modeling of a Low Energy Consuming Hybrid Desiccant Cooling System for the Hot and Humid Areas of Pakistan. Doctoral thesis, NED University of Engineering & Technology, Karachi.

Azhar Munir, . (2015) Effect of Crack on Structural Dynamics and Aeroelastic Analysis of Structures. Doctoral thesis, University of Engineering & Technology Taxila - Pakistan.

E

Ejaz Mahmood Shahid, Shahid (2012) Performance Of Ci Engine In Dual Fuel Mode Using Vegetable Oils. Doctoral thesis, University Of Engineering And Technology, Lahore.

Engr. Mirza, Jahanzaib (2008) COPING WITH MEDIUM VOLUME-LOW VARIETY MANUFACTURING ENVIRONMENT IN AUTOMOBILE INDUSTRY OF PAKISTAN. Doctoral thesis, University of Engineering and Technology, Taxila.

F

Faiza Iqbal, . (2015) Multipath Routing Optimization in Wireless Mesh Networks. Doctoral thesis, NNational University of Sciences and Technology (NUST), Islamabad, Pakistan.

I

IFTIKHAR US SALAM, . (2008) Analysis Of Crack Propagation In A Thick-Walled Cylinder Under Fatigue Loading. Doctoral thesis, National University of Sciences and Technology (NUST), Rawalpindi.

Irfan Ahmad Gondal, . (2012) Infrastructure Analysis for Producing Hydrogen from Renewable Resources in Pakistan. Doctoral thesis, University of Engineering & Technology, Taxila.

K

Kamran, Ahmed Khan (2010) Strength and Sealing Behavior of Gasketed Bolted Flane Joint under Combine Thermal and Internal Pressure Loading. Doctoral thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

Khanji, Harijan (2008) Modeling & Analysis of the Potentional Demand for Renewable Resources of Energy in Pakistan. Doctoral thesis, Mehran University of Engineering Technology, Jamshoro.

Khawaja Mustafa, Amin (2014) Optimizing Effects Of Superheat And Cooling Rate On Properties Of Squeeze Cast Aluminum Alloys For High-performance Structural Applications. Doctoral thesis, University of Engineering & Technology, Lahore.

Khizar Azam, . (2013) Driver Fatigue prediction Model. Doctoral thesis, University of Engineering & Technology Peshawar.

M

Mohammad, Naeem Khan (2012) Formulation Of A Strategy For Up-gradation Of The Industrial Technology In Pakistan. Doctoral thesis, University Of Engineering And Technology, Peshawar.

Muhammad, Mansha (2013) Optimization of Dedicated Natural Gas (High Comp) Spark Ignition Engine for Maximum Efficiency and Minimum Emission. Doctoral thesis, University Of Engineering And Technology, Lahore.

Muhammad, Nawaz Akhtar (2009) Design Development And Manufacturing Of Fuel Cells. Doctoral thesis, University Of Engineering And Technology, Lahore.

Muhammad, Siddique (2005) EXPERIMENTAL AND FINITE ELEMENT INVESTIGATION OF RESIDUAL STRESSES AND DISTORTIONS IN WELDED PIPE-FLANGE JOINTS. Doctoral thesis, Institute of Engineering Sciences and Technology.

Muhammad Shakaib, . (2009) Pressure And Concentration Gradients In Membrane Feed Channels Numerical And Experimental Investigations. Doctoral thesis, NED University of Engineering & Technology, Karachi.

Mukhtar, Hussain Sahir (2007) ENERGY SYSTEM MODELING AND ANALYSIS OF LONG TERM SUSTAINABLE ENERGY ALTERNATIVES FOR PAKISTAN. Doctoral thesis, University of Engineering and Technology.

N

Naeem Ullah Dar, . (2009) Expert System For Optimization Of Welding Process Of Thin Walled HSLA Steel Structures. Doctoral thesis, University of Engineering Technology, Taxila.

Q

Qamar, Iqbal (2012) Analysis of Damping in a Multi-Span Tube of a Bundle. Doctoral thesis, University of Engineering & Technology, Taxila.

R

RAJA AMER AZIM, . (2015) ROLLOVER MITIGATION CONTROLLER DEVELOPMENT FOR A THREE WHEELED PLATFORM. Doctoral thesis, National University of Sciences and Technology, H-12, Islamabad, Pakistan.

Rafi Javed, Qureshi (2012) Modeling And Analysis Of Globalizing Manufacturing Smes In Developing Economies. Doctoral thesis, University of Engineering and Technology, Taxila.

Riffat, Asim (2009) Fatigue Behavior Of Piezoelectric Ceramics Material. Doctoral thesis, University of Engineering and Technology, Taxila.

Rizwan Alim, Mufti (2009) Mechanical and Microstructure Investigation of Weld based rapid Prototyping. Doctoral thesis, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology.

Rizwan Alim, Mufti (2009) Mechanical and Microstructure Investigation of Weld based rapid Prototyping. Doctoral thesis, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology.

S

Syed Adnan, Qasim (2013) Modeling Realistic Piston Skirts & Ist Compression Ring Ehl In The Initial Engine Startup. Doctoral thesis, National University Of Science And Technology, Islamabad.

T

Tariq, Saeed Khan (2010) Evaporation in Flooded Corrugated Plate Heat Exchanger with NH3 and NH3/Miscible Oil. Doctoral thesis, Ghulam Ishaq Khan Institute Of Engineering Sciences And Technology, Swabi.

Tariq Saeed, Khan (2011) Evaporation in Flooded Corrugated Plate Heat Exchanger with Ammonia and Ammonia Missible Oil. Doctoral thesis, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi.

This list was generated on Sun Nov 19 00:57:20 2017 PKT.